07-09-2020, 10:18 PM
I wonder if they have different books then. Mine, under Unbox and Test, Step 6 States, "After the above leveling is complete, set the current Z axis position as the initial height of the first layer of printing. The operation is as follows: return to the previous interface and click "Set Z=0". At this time, the screen will pop up a message as shown in the picture. Click "Confirm" to complete." Also my Set Z=0 has a home icon above it not a refresh symbol with a zero in the center. If there is a different alignment procedure that does not use it where can I find it?