08-21-2020, 07:47 AM
Hello,
Looking for help, I'm trying to figure out what the problem is with my new elegoo mars pro - since it won't print.
It shouldn't be the file. And I did level the plate, and tried multiple times with releveling.
When I make a test print without build plate and vat I can see that it starts printing and the layer count increases and rail lift and lower accordingly.
As soon as I add the vat and build plate, the rails lower the build plate, hits the bottom, machine gets noisier as if it believes it need to lower the plate even more. Nothing happens, printing never starts, print count doesn't increase.
Videos of the problem here if interested: https://www.reddit.com/r/ElegooMars/comm...m_i_doing/
Any one experienced something similar, am I doing something wrong?
Best
Peter
Looking for help, I'm trying to figure out what the problem is with my new elegoo mars pro - since it won't print.
It shouldn't be the file. And I did level the plate, and tried multiple times with releveling.
When I make a test print without build plate and vat I can see that it starts printing and the layer count increases and rail lift and lower accordingly.
As soon as I add the vat and build plate, the rails lower the build plate, hits the bottom, machine gets noisier as if it believes it need to lower the plate even more. Nothing happens, printing never starts, print count doesn't increase.
Videos of the problem here if interested: https://www.reddit.com/r/ElegooMars/comm...m_i_doing/
Any one experienced something similar, am I doing something wrong?
Best
Peter