11-12-2020, 03:52 PM
I do not own a Pro 2, and I know it's curing lamp is supposed to much more powerful--hoewver 3 s seems like an awfully short exposure. I'd bump that to 5 s and see what happens. Also, in resin printing I find it helps to envision the "supports" as "hangers", they do ot support printed portions of the model, the already printed parts of the model hang from them--I.e. it is important that they are sufficient in number and sufficiently robust to tear the current layer from the FEP.
Just as an FWIW, here are the "hangers" I use for a press-fit plumbing elbow I have printed successfully several times:
Aligning the model at an angle minimises the area of each layer, minimising the force needed to pull it from the FEP.
Just as an FWIW, here are the "hangers" I use for a press-fit plumbing elbow I have printed successfully several times:
Aligning the model at an angle minimises the area of each layer, minimising the force needed to pull it from the FEP.