Print Time on Display counting up after Print is stopped

[chris1601]

Hi everyone, 

I noticed that the time which is displayed when the print is finished just keeps counting up. 
So for example I did a 6h print the other night starting at around 10pm. When I checked the print in the morning at around 7am the Display showed "printing done. Time Elapsed 9h27m". where it should have displayed the real print time of around 6h not the time since the print started.

I modified the "firmware file" to switch off the fans.

Anyone has an idea how to show a real printing time?

Help would be appreciated. 

Greetings from Germany

[cliffyk]

I will state the obvious, reverse your modifications and see what happens...