Elegoo Mars failed to print whole object

[Nemanja]

I have Elegoo Mars 3d printer, and I have some issues while printing. I`am dentist using yprinter to print provisional teeth with NextDent resin created by 3D Systems (a kind of milky/yellow color). 
After setting built up platform, it started to print only base of my object and some supports. Rest of the object (just a 15-20% of it is succesfull) didnt went out printed. 
 What could be problem, and maybe if someone have precise parameters for a resing that Im usig right now?

Cheers! 

[cliffyk]

What exposure times are you using? If possible post a screen shot of your Print settings:

[Nemanja]

What exposure times are you using? If possible post a screen shot of your Print settings:

Here are my parameters.

[cliffyk]

I would suggest you try reducing the lifting speeds--make the bottom speed 75 mm/m and the regular layer 60 mm/m

[Nemanja]

Thank you. I ll try like you said and update with the results.

[Nemanja]

What exposure times are you using? If possible post a screen shot of your Print settings:

Here are my parameters.

Should I also put light of delay on 1.5 sec as you did? Currently is 0 sec

[cliffyk]

No need to, those settings only work if set to > 7 seconds...

[Nemanja]

No need to, those settings only work if set to > 7 seconds...

Thank you very much for all information that you gave me. I succesfully printed my model. 
Best regards

[cliffyk]

Great news! Glad it worked out!