03-31-2021, 08:39 AM
Please, I just bought an Elegoo Mars 2 Pro.
I run unsuccessfully the first test (the chess in usb pen); this was because the build platform were not enough fastened, so it moved.
Now, before running the second test, I tried to clean both the tank and the platform. Nevertheless there is a small thin film of solidified cured resin (water washable ceramic gray) on both tank borders and platform. This is hard to clean: water does not wash it, as it is cured; the film is very thin so I cannot simply peel off in one piece (the film breaks in small pieces).
Is there some trick to clean the thin film of residual cured resin?
Thanks in advance,
Valerio
I run unsuccessfully the first test (the chess in usb pen); this was because the build platform were not enough fastened, so it moved.
Now, before running the second test, I tried to clean both the tank and the platform. Nevertheless there is a small thin film of solidified cured resin (water washable ceramic gray) on both tank borders and platform. This is hard to clean: water does not wash it, as it is cured; the film is very thin so I cannot simply peel off in one piece (the film breaks in small pieces).
Is there some trick to clean the thin film of residual cured resin?
Thanks in advance,
Valerio