Posts: 97
Threads: 8
Joined: Jul 2019
Reputation:
15
You should be able to run just the epax ui and be good to go, I'll actually test that right now...
Posts: 97
Threads: 8
Joined: Jul 2019
Reputation:
15
I just tested the Epax UI, running the latest elegoo FW and seems to work...
Posts: 5
Threads: 0
Joined: Aug 2019
Reputation:
0
Thanks for checking!
I'll only load
- UI_3_5-MARS_EPAX.bin
- update.LCD
Much appreciated...
Posts: 6
Threads: 1
Joined: Sep 2019
Reputation:
2
Hello, everyone.
My firmware is V4.2.16_LCD /1440x2560 /F2.0
i try to install the fpga xxx.bin but i always get the error message: error "no authorization!".
i tried the release:
Mars V4.2.16_LCD /1440x2560 /F2.7
and
MARS EPAX NETWORK ENABLED CHITUBOX 1.4.0 + 1.5.0.zip
does anyone have any idea how I can proceed to activate the network?
Posts: 4
Threads: 0
Joined: Sep 2019
Reputation:
0
09-17-2019, 11:06 AM
(This post was last modified: 09-21-2019, 09:21 AM by stonehome.)
I can confirm: If you see V4.2.20.3_LCDM /1440x2560 /F2.9 you just need to print UI_3_5-MARS_EPAX.bin
Please update the readme doc:
Code:
4. If you see V4.2.20.3_LCDM /1440x2560 /F2.9 (GO TO PART X BELOW)
---------- PART X ----------
!!!!! DO NOT USE SD/USB THUMBDRIVE !!!!!
!!!!! ONLY USE A USB THUMBDRIVE!!!!!
1. Connect USB to computer, delete all files off of the USB thumbdrive
2. Format USB thumbdrive to FAT32
3. Copy UI_3_5-MARS_EPAX.bin files from "Firmware Files" folder to USB thumbdrive
4. Power off Mars Printer
5. Connect USB thumbdrive to Printer
6. Power on Mars Printer
- When powered on, Printer display will stay black and a series of beeps will come from the Printer
- Once the beeps have completed, the logo will appear and be on the home/main screen of the display
9. Go to Print, select the "UI_3_5-MARS_EPAX.bin" file and print
10. Once completed, the menu screen will change
11. Go to System and now you should see a Network option
12. GO TO PART C BELOW
Elegoo Mars
Creality CR-X
Posts: 4
Threads: 0
Joined: Sep 2019
Reputation:
0
09-17-2019, 03:14 PM
(This post was last modified: 09-21-2019, 09:23 AM by stonehome.)
This is what I found regarding the mainboard .
Please confirm and/or include some pictures and/or links.
Elegoo Mars
Creality CR-X
Posts: 1
Threads: 0
Joined: Aug 2019
Reputation:
0
Hello,
before I try to upgrade my Mars to ethernet functionality, I would like to know how to switch back to the original software in case of unforeseen problems?!
Also actually I have the FW 4.2.19 /F2.7 installed! Is the instruction still valid even with a higher version number??
BR, Dirk