12-25-2020, 01:21 PM
I don't think the resin is your complete problem--however the water washable resin sucks (see my posts here for more about that).
Beyond that, what might help is reducing the lifting speed(s) in the Chitubox settings:
I have found their default setting of 100 mm/minute to be too aggressive and that it can tear the raft and/or model from the hangers (lower lift speed = less force)...
Beyond that, what might help is reducing the lifting speed(s) in the Chitubox settings:
I have found their default setting of 100 mm/minute to be too aggressive and that it can tear the raft and/or model from the hangers (lower lift speed = less force)...